As the application of air compressors becomes more and more extensive, the frequency of use is getting higher and higher, and the maintenance of air compressors is becoming more and more important. However, there are some misunderstandings in the maintenance process, such as air compressor oil change, seemingly simple and complex, improper handling will cause some failures, leading to more serious consequences. Secondly, some suggestions for air compressor users to change oil are introduced.
1. First of all, if there is not much sludge in the air compressor when changing the oil, we can fill half of the new oil, run it for 15 minutes to 1 hour, and then fill it with new oil to resume normal operation. If there is too much carbon deposit in the sludge, the oil cylinder of the air compressor can be disassembled, the sludge and carbon deposit can be manually removed, and then cleaned with a special cleaning agent. However, after cleaning, the water should be blown dry, and then the cleaning oil should be added for 100 to 200 hours, then the cleaning oil should be drained, and new oil should be added to resume normal operation. Otherwise, it is likely to destroy the performance of oil additives, but also may lead to safety accidents. 2.
Next, you need to drain all the remaining air compressor oil every time you change the air compressor oil. Scroll air compressor should not be used to add and filter and reuse. Because although the surface of the air compressor oil color unchanged, but the consumption of additives may have exceeded the limit.
3. customers should pay attention to different air compressor oil brands, different grades of air compressor oil must not be mixed. In addition, when changing the oil, you should also replace the oil filter, coarse filter, oil filter element, air separation fine filter, oil bypass filter, etc., and check whether the air filter, temperature control alarm, one-way valve, filter collector, etc. are in good condition.
4. recommends that you do not choose a fixed time when changing the oil. Due to the influence of environment, machinery, equipment and impurities, the aging of the oil can be accelerated. In order to prevent carbon deposition and coking, the use process